EN
Wear gloves, goggles, and a face mask.
Clean the original surface with a general cleaning solution. (Hydrochloric or Citric) Rinse with clean water and wipe dry.
See detailed in surface preparation section.
Open the can using a metal scraper. Scrape off the clear sand from the bottom of the can (Very important).
Mix thoroughly until the clear sand is homogenous with the solution.
Dip foam roller into the can fully submerging the roller on the first time and only half on subsequent times.
Apply the foam roller onto the desired surface ensuring that the clear sand is evenly distributed.
Make sure to stir the solution everytime before subsequent dipping.
- Dry to touch within 1 hr.
- Dry and walkable within 6 hrs.
- Dry and can be exposed to water within 12 hrs.
- Can be clean using brush after 24 hrs.
Clean and wash the surface with mild cleaning agent (Non-acidic) before first use.
